Can earthquakes be predicted?

Total Pageviews

Search This Blog

Powered By Blogger

Friday, July 28, 2023

Hightides in ocean and Moon position ..a study

 Have you ever tried to check the Moon position at the time of Hightide and low tides in oceans at your city sea Shores?


Let me give an example of today's high tide and low tides at Mumbai -India port with height in meters.


Time in Indian Std time..(UTC+5.30 hrs)


Low tide...02.03hrs..1.15 mtrs

High tide...9.19 hrs...3.72 mtrs

Low tide...15.05 hrs..2.41 mtrs

High tide...20.44 hrs..3.24 mtrs

say for example 

at 9.19 hrs IST ie 3.49 UTC ..

Moon is at 110 degree West

Now Mumbai is at 73 degree East.

Thus Nadir postion is 107 west .

The 3 degree difference seen between  107 and 110 is due to Sun.

Actually the pull applicable location is the resultant pull of Moon and Sun.However as Moon has much stronger pull than Sun it is almost nearer to Moon locations 

Thus we can safely assume the tidal pull follows Moon locations.

Now look at low tide

it is at 15.05 IST ie 9.35 UTC

Watch Moon at 9.35 UTC today is 167 East 

ie 73 +90=163 East

Moon is 90 degree away from Mumbai


Again second hightide is at 20.44 IST .3.24 mtr ie 15.14 UTC 

Now watch Moon at 15.14 UTC today it is at 86 East. A margin of 13 degrees.

  This is maximum margin.

Hence in my epicenter location hypothesis  15 margin is taken

  Now imagine the semi solid ,hot lava below the crust ,moving in tendom with ocean water and following the same hightide ,low tide pattern ....

 Not only that,the height of Hightide of magma is much heigher than this 3 to 4 mtr heightides in oceans.

 The more the volume and area of liquid spread over ,the more is the height of hightide.

   Have you ever wandered why there is no hightide in a pond or lake? Infact the heightide in pond is negligible .

 Now compre the ratio of volume of a lake with that of Oceans and also the ratio of volume of oceans to that of molten magma below the Earthcrust.

....This is in nutshell...my tidal pull theory of Earthquakes 

for more on theory and predictions pl see 

https://lnkd.in/dzRtvB6w


6 comments:

Roger Hunter said...

Amit;

A little searching on the Net showed that 3 planet conjunctions are extremely rare and thus would be no use in quake prediction.

It would seem that only sun and moon could be used for prediction and we know that doesn't work.

So now what?

Roger

AMIT said...

Roger
If you consider inner planets ans Mars,there are various combinations that can occur
Amit

Roger Hunter said...

Amit;

I still need to know where sun, moon, mars, venus, jupiter and saturn are located at the time of a quake and all I'm finding is astrological signs.

Roger

AMIT said...

Roger
Let us understand the Astronomical charts ,so that all you problems of fixing the location of planets and Moon can be solved.
There are 12 Astronomical signs given in Astronomical tables.Each sign represents 30 degrees,total comprising 360 degrees.
First sign starts at 0 degrees...second starts at 30 degrees. et ....
1)Aries
2) Taurus
3)Gemini
4)Cancer
5)Leo
6) Virgo
7) Librs.
8) Scorpio
9) Sagittarius
10) Capricorn
11)Aquarius
12)Pisces
Now suppose at a given time of quake the chart shows Moon at say,Gemini 20 degree-. It means the Moon has completed and crossed first two signs and now in third ie Gemini 20 degrees
So the position of Moon at that time is
30+30+20=80 degrees from the 0 degree ie starting point.
Find out exact degrees of all planets including Sun in this way.
If any two are in conjunction or closer they will have same or closer degree locations say Moon is at 80 degree and Sun is at 78 degrees ie 2 degrees away from New Moon.If Sun is at 260 degrees ie exactly opposite (Nadir) it is full Moon ,spot on.
Like that you can decide all planets locations

Roger Hunter said...

Amit;

I suspected as much but couldn't find anything to confirm it. Still, it's too big a task
to do by hand and I'm just not up to the programming effort lately. Maybe later if conditions improve.

Roger

Roger Hunter said...

Amit;

I'm trying to convert the quake file into comma separated values for computer reading.
TrueBasic is not cooperating. It's calling errors that make no sense (to me).

I'll keep trying.

Roger